Uniden whamx4bk 用户指南
Basic Operation
16
Using Channel Scan
Hold down STEP/SCAN for about 2 seconds. The radio
scans all channels stored using the memory feature,
starting with the lowest channel number to the highest.
The channel numbers appear on the display.
scans all channels stored using the memory feature,
starting with the lowest channel number to the highest.
The channel numbers appear on the display.
Notes:
•
TRI appears and the radio activates Triple Watch
when channel scan is active. During channel scan, the
radio automatically checks Channel 16 and Channel 9
every two seconds.
when channel scan is active. During channel scan, the
radio automatically checks Channel 16 and Channel 9
every two seconds.
•
Hold down 16/9/TRIPLE WATCH to take the radio out
of Triple Watch mode. The radio continues to scan.
of Triple Watch mode. The radio continues to scan.
Saving Channels to Memory
Briefly press MEM/UIC. The displayed channel is saved to
the radio’s memory. Once a channel has been programmed
into memory, MEM appears on the display each time the
channel number appears. You can store any channel
except a weather channel into the radio’s memory. Briefly
press MEM/UIC again to remove the channel from memory.
the radio’s memory. Once a channel has been programmed
into memory, MEM appears on the display each time the
channel number appears. You can store any channel
except a weather channel into the radio’s memory. Briefly
press MEM/UIC again to remove the channel from memory.
Deleting Channels From Memory
Tune the channel you want to delete then briefly press
MEM/UIC. MEM disappears.
MEM/UIC. MEM disappears.
Changing UIC Mode
Hold down MEM/UIC for about 2 seconds. The currently-
set UIC (USA, INT, and CAN) appears as you press MEM/UIC.
set UIC (USA, INT, and CAN) appears as you press MEM/UIC.
Selecting Menu Items
Briefly press SELECT/SCRAM to select menu items.
Displaying Time/Position/Course Info
Briefly press SELECT/SCRAM while a channel number
appears to display the following.
•
appears to display the following.
•
Current Local Time
•
Current Position (Latitude/Longitude)
•
SOG (Current Speed Over Ground)
•
COG (Current Course Over Ground)
Briefly press SELECT/SCRAM again to turn off display
mode. The current channel name appears.
mode. The current channel name appears.