ATTO Technology diamond array v 用户手册

34

General use CLI commands

FirmwareRestart
Causes a warm restart of the Diamond Storage Array.

Immediate command: FirmwareRestart

Help
Displays a list of available commands. Type ‘help’ 
followed by a command name to display detailed 
command-specific information.

Get syntax: Help [Command Name]

PartitionCommit
Commits the current Planned Partition Configuration, 
making it the persistent, Active configuration. 
PartitionCommit must be used to alter any partition 
settings. Performs a firmware restart.

Set syntax: PartitionCommit
Get syntax: none

SaveConfiguration
If the restart option is selected, the Diamond cycles its 
power. The norestart option saves changes without 
restarting. Please note: certain modifications require a 
SaveConfiguration command and a system restart. If 
required, the return Ready. * displays after the return for 
the modification. You may make several changes through 
commands and SaveConfiguration before implementing 
a restart, but once you have restarted the Diamond, all the 

command changes created before the restart and saved are 
implemented. Changes to zones, however, are unaffected 
by SaveConfiguration. You must use ZoneCommit. 
Restart or no Restart parameter is optional

Set syntax: SaveConfiguration <Restart| NoRestart>

SystemSN
Stores the Diamond Storage Array serial number. The 
serial number may be one to 16 characters.

Set syntax: set SystmSN [n]
Requires a SaveConfiguration command
Get syntax: get SystemSN

VerboseMode
Specifies the detail of verbal feedback for the CLI. 
Disabling this option removes parameter names from 
‘get’ commands and removes descriptions from ‘help’ 
commands. 

Choices: enabled, disabled
Default: enabled (returns have parameter information)
Set syntax: set VerboseMode [enabled | disabled]
Get syntax: get VerboseMode

ZoneCommit
Commits the current Planned Zone Configuration File, 
making it the persistent, active configuration.

Set syntax: ZoneCommit