EchoStar dvr-5000 hdd 软件指南
Section 4
Page 4 - 4
EchoStar International Corporation
©
2
2
001
E
c
hoS
tar
Inte
rnati
rnati
o
nal
C
o
rp
orat
io
n
A
ll
rig
hts
re
s
erved
F
OR MOTORIZED INSTALLATIONS
- A
UTOSAT
Fixed dish setup
■
To select the device that controls the polarity.
■
To set the LNB type(s) you use.
- Check signal
■
Wait for the Checking Configuration to complete.
- Search Channels
■
Wait for the search to complete.
Program Satellites
■
To set the satellite you want to scan for the LNB.
■
To select a transponder of the selected satellite.
■
To move the dish for best signal level and quality.
User LNB setting
■
To select the first or second user defined LNB.
■
To enter the frequencies of the user LNB.
■
To select the device that controls the polarity.
■
To set the control signals.
About EchoStar
■
In the About EchoStar information menu you can look
up the factory and receiver information.
up the factory and receiver information.
System upgrade
■
To select the default or user defined satellite where you
want to download from.
want to download from.
Factory reset
■
Tto reset the receiver to the initial factory settings.
System setup
■
To set the dish type you use.
■
To set the amount of LNBs you have installed.
■
To set the switch type which you use to control the dish
installation (if used).
installation (if used).
■
To set the LNB type(s) you use.
■
To set the scan method
- Autosat (1)
■
To set the East and West limits for the dish.
■
To select the reference satellites
■
To move the dish for best signal level and quality.
- Autosat (2)
■
To set the satellites you want to scan for the LNB.
- Search Channels
■
Wait for the search to complete.
Fixed dish setup
■
To select the device that controls the polarity.
■
To set the LNB type(s) you use.
- Check signal
■
Wait for the Checking Configuration to complete.
- Search Channels
■
Wait for the search to complete.
Program Satellites
■
To set the satellite you want to scan for the LNB.
■
To select a transponder of the selected satellite.
■
To move the dish for best signal level and quality.
User LNB setting
■
To select the first or second user defined LNB.
■
To enter the frequencies of the user LNB.
■
To select the device that controls the polarity.
■
To set the control signals.
About EchoStar
■
In the About EchoStar information menu you can look up
the factory and receiver information.
the factory and receiver information.
System upgrade
■
To select the default or user defined satellite where you
want to download from.
want to download from.
Factory reset
■
Tto reset the receiver to the initial factory settings.