Hunter 31206 用户指南

9

©2011 Hunter Fan Company

Problem:
Excessive noise.
Solution:
1. Check the Water Tank to make sure it is properly seated on the base. 
2. Check the Water Tank to make sure there are no bubbles when the Water Tank 

is full and running. If there are bubbles, turn the unit OFF until the bubbling stops. 

When the bubbling has stopped, set the unit to the desired speed. 

Problem:
Humidifier not working. 
Solution:
1. Make sure the humidity level is not set to OFF.
2. Adjust the humidity level using the Humidity Knob. Once the room reaches the 

set humidity level, the humidifier will turn OFF; this is normal. 
3. Ensure the UVC bulb compartment is installed properly.

Problem:
Mineral build-up on the Water Tank or Tray. 
Solution:
1. Refer to the section “Cleaning and Storage” on page 7.

Problem:
Humidity output and water usage decreased.
Solution:
1. Check the Humidistat Knob to make sure it is set to the desired humidity level. 
2. Check the Water Tank to make sure there are no bubbles when the Water Tank 

is full and running. If there are bubbles, turn the unit OFF until the bubbling stops. 

When the bubbling has stopped, set the unit to the desired speed. 
3.  Clean  any  components  that  have  mineral  build-up.  Refer  to  the  section