Yamaha RX-V1600 业主指南

■ Remote sensor  REMOTE SEN
Use to activate or deactivate the signal-receiving 
capability of the remote control sensor on the front panel 
of this unit.
Choices: ON, OFF
• Select ON if you want to activate the signal-receiving 

capability of the remote control sensor.

• Select OFF if you want to deactivate the signal-

receiving capability of the remote control sensor.

We recommend setting this parameter to ON in most cases.

■ Wake on RS-232C access  WAKE ON 232C
Use to set this unit to transmit data via the RS-232C 
interface when this unit is in the standby mode.
Choices: Y (yes), N (no)
• Select Y set this unit to transmit data via the RS-232C 

interface.

• Select N set this unit not to transmit data via the 

RS-232C interface.

■ Remote control AMP ID  REMOTE AMP
Use to set the AMP ID of this unit for remote control 
recognition (see page 95).
Choices: ID1, ID2
• Select ID1 when the remote control AMP library code 

is set to 2001.

• Select ID2 when the remote control AMP library code 

is set to 2002.

You need to set the corresponding remote control code for the 
remote control.

■ Remote control tuner ID  REMOTE TUN
Use to set the tuner ID of this unit for remote control 
recognition (see page 95).
Choices: ID1, ID2
• Select ID1 when the remote control tuner library code 

is set to 2602.

• Select ID2 when the remote control tuner library code 

is set to 2603.

You need to set the corresponding remote control code for the 
remote control.

■ Remote control XM ID  REMOTE XM

Use to switch the XM-related remote control codes 
between ID1 and ID2.
Choices: ID1, ID2
• Select ID1 when the remote control XM library code is 

set to 2604.

• Select ID2 when the remote control XM library code is 

set to 2605.

You need to set the corresponding remote control code for the 
remote control.

■ Fan operation mode  FAN MODE
Use to set the operation of the cooling fan of this unit.
Choices: AUTO, CONT.
• Select AUTO to set the fan to operate automatically 

according to the temperature of this unit.

• Select CONT. to set the fan to operate continuously 

regardless of the temperature of this unit.

■ Tuner frequency step  TU

Use to set the tuner frequency step according to the 
frequency spacing in your area.
Choices: AM10/FM100, AM9/FM50
• Select AM10/FM100 for North, Central and South 

America.

• Select AM9/FM50 for all other areas.

■ Bi-AMP  BI-AMP
Use to activate or deactivate the bi-AMP function.
Choices: ON, OFF
• Select ON if you want to activate the bi-AMP function.
• Select OFF if you want to deactivate the bi-AMP 

function.

When BI-AMP is set to ON, the SURROUND BACK terminals 
cannot be used to connect surround back speakers in that the 
SURROUND BACK terminals are already used for the bi-AMP 
connection (see page 19).

■ Video reset  V-RESET
Use to initialize the parameter settings for DISPLAY SET 
in OPTION MENU (see page 85). This feature is useful if 
the SET MENU items are not displayed on your video 
monitor due to a technical error between the CMPNT I/P 
setting and the capability of your video monitor. That is, if 
your video monitor does not support the analog video 
signals with 480p of resolution, the SET MENU items 
may not be displayed on your video monitor when 
CMPNT I/P is set to ON (see page 85).
Choices: YES, CANCEL

The parameter setting for DIMMER is not initialized (see 
page 85).