Yamaha RX-V3900 用户指南

• If the “ERROR” or “WARNING” screens appears, check the cause of the problem, then run perform the automatic setup again.
• If warning message “W2” or “W3” appears, the adjustments are made, however the adjustment may not be optimal.
• Depending on the speakers, warning message “W1” may appears even if the speaker connections are correct.
• If error message “E10” occurs repeatedly, contact a qualified Yamaha service center.

Speaker polarity is not correct. This 
message may appear depending on the 
speakers even when the speakers are 
connected correctly.

Check the speaker connections for proper 
polarity (+ or –).

The distance between the speaker and the 
listening position is over 24 m (80 ft).

Bring the speaker closer to the listening 
position.

—

The difference of volume level among 
speakers is excessive.

Readjust the speaker installation so that all 
speakers are set in locations with similar 
conditions.

—

Check the speaker connections.

Use speakers of similar quality.

—

Adjust the output volume of the subwoofer.

The result of “Wiring” checked by the 
automatic setup is different from the 
settings manually configured in 
“Configuration”.

Manually configure the speaker settings in 
“Configuration”.

“Wiring” has not been checked.

Manually configure the speaker settings in 
“Configuration”.