Yamaha RX-Z9 用户指南

• The available parameters may be  displayed on more than one 

page of the on-screen display. To scroll through pages, press  
k/n.

• You cannot change parameter  values when Memory Guard is 

set to “Guard”. If you want to  change the parameter values, set 
Memory Guard to “Free” (see page 85).

Use this feature to reassign digital input/outputs, select the 
input signal, rename the inputs, or adjust the level of the 
signal input to each jack.

h

h

■

Use this feature to select the input signal.
Input Select > input source (DVD, etc.) > Mode >
Choices: Auto, D.D.RF, DTS, Digital, iLINK, Analog

y

• This menu is only available fo r input sources that have been 

assigned digital jacks.

• Before you can select iLINK, you  must first connect this unit to 

an i.LINK component and assign it to an input.

• Before you can select D.D.RF, yo u must first select DTV/LD as 

the input source and then specify 1 LD-RF for the Coaxial 

Input (see page 66).

The memory back-up circuit prevents the stored data 
from being lost even if this unit is set in the standby 
mode, the power cord is disconnected from the AC 
outlet, or the power supply is temporarily cut due to 
power failure. However, if the power is cut for more 
than one week, the parameter values will return to the 
factory settings. If this happens, edit the parameter 
value again.

00EN.00_RXZ9_U.book  Page 65  Friday, October 17, 2003  11:40 AM