Korg MICRO 用户手册

Effect guide

KEY SYNC (LFO KeySync) ............................................................ [OFF, ON]

Specifies how the LFO will be reset at note-on.

NOTE

This parameter will be displayed and can be set if “MOD SRC” is LFO.

Note on

Note all off

With OFF, the LFO phase will not be reset when note-on occurs.
With ON, the first note-on from a condition of no keys being pressed will
reset the LFO to the phase specified by “INI.PHASE,” and modulation will
be applied at that phase even if subsequent note-ons occur.

This takes effect when a note-on occurs on the global MIDI channel.

INI.PHASE (LFO Init Phase) ...................................................[000…180°]

Specifies the starting position of the waveform.
With a setting of 0°, the waveform will start from its beginning at note-on.
With a setting of 180°, the waveform will start from the mid-point of its cycle
at note-on.

NOTE

This parameter will be displayed and can be set if “KEY SYNC” is Tim-
bre.

CTRL SRC (Control Source) ...................................[OFF, VELOCITY…MIDI3]

Selects the control source.
The filter will be controlled by the selected source.

NOTE

This parameter will be displayed and can be set if “MOD SRC” is CTRL.

Source

Explanation

3. BAND EQ (4Band EQ)

Left

Right

Dry / Wet

Stereo In - Stereo Out

Band1 Band2 Band3 Band4

PEQ

LEQ

HEQ

PEQ

Trim

This is a stereo EQ for which the type can be selected independently.

DRY/WET...................................................... ["DRY", 99:1…1:99, "WET"]

Sets the balance between the effect and dry sounds.

TRIM................................................................................... [000…127]

Sets the input level of EQ.

OFF

Not used

VELOCITY

Velocity

P.BEND

Pitch bend

MOD.WHEEL

Modulation wheel

MIDI1

Source specified by “MIDI1” in Global mode: MIDI

MIDI2

Source specified by “MIDI2” in Global mode: MIDI

MIDI3

Source specified by “MIDI3” in Global mode: MIDI

Effect Guide