Zonet zsr0104up 用户手册

 

 

One User’s Manual or CD (including quick guide) 

 
 

The Broadband Firewall Router requires one of the following types of software: 
 

 

Windows 95/98/Me or Windows NT/2000/XP 

 

Any TCP/IP-enabled systems like Mac OS and UNIX 

 
 

The Broadband Firewall Router with embedded 4-port 10/100Mbps Switch features 
auto-negotiation switch ports and provides the flexibility to fit into your operational space and 
network environment. 
This device is built with plug & play, auto-negotiation supports all ports, half & full-duplex 
multi-selection, and a store and forward transmission scheme. 
The Broadband Firewall Router requires the following network hardware: 
 

 

UTP cable (Cat.5 Twisted-pair), 10Base-T or 100Base-TX Fast Ethernet. 

 
Note: Prepare twisted-pair cables with RJ-45 plugs. Use Cat.5 cable for all connections. 

Make sure the length of each cable does not exceed 328 feet (approximately 100 
meters). 

 
 

On (Green) 

The Broadband Firewall Router’s power is on. 

Power 

Off 

The Broadband Firewall Router’s power is off. 

Status Blinking 

(Red) 

When power is first switched on, the Status indicator will flash one 
time. 

On (Green) 

Port has a valid network connection at 100Mbps. 

On (Orange) 

Port has a valid network connection at 10Mbps. 

WAN 

Blinking 
(Orange) 

Data is being transmitted and received via the WAN port. 

On (Green) 

Port has a valid network connection at 100Mbps. 

On (Orange) 

Port has a valid network connection at 10Mbps. 

LAN 

Off 

Port has not established a network connection. 

Blinking (Green) Data is being transmitted and received at 100Mbps. 

Activity  Blinking 

(Orange) 

Data is being transmitted and received at 10Mbps 

Parallel  Blinking (Green) Data is being transmitted via Parallel Port (PID1) 
USB 

Blinking (Green) Data is being transmitted via USB Port (PID2) 

 
 

The Broadband Firewall Router requires one of the following external modem(s) or device(s): 

 

2