Zhone 1740 shdsl 安装指导

下载
页码 1
1740 SHDSL 2/4-Wire Router
Quick Installation Instructions
Document Number 1740-A2-GZ10-00
May 2005 
Installation
Connect the supplied external AC adapter into the DC power 
outlet on the back of the router. Connect the power supply into 
your wall outlet or surge protector. Turn on the power switch. After 
a self-test runs, the POWER indicator on the front of the router 
will illuminate green to indicate that power is being supplied to the 
router.
Connect the supplied RJ45 cable to the port marked LINE at the 
back of the SHDSL router. Connect the other end of the cable to 
your SHDSL wall outlet. A green LED on the front of the device 
labeled LINK will illuminate steadily. 
Insert one end of the RJ45 Ethernet cable into one of the LAN 
ports marked LAN on the back of the SHDSL router. Connect the 
other end of the cable into the Ethernet Network Interface Card 
(NIC) installed in your computer. Connect up to four Ethernet 
devices to the router.
The router’s default IP address is 192.168.1.1. To configure the 
router, set up your PC to be on the same network segment and 
open 192.168.1.1 with your web browser.
See the user’s guide on the CD for more information.  
*1740-A2-GZ10-00*
*1740-A2-GZ10-00*
05-17663
Copyright 2005 Paradyne Corporation. Printed in U.S.A.