Zhone 2000 用户手册

- 98 -

Router tasks are all displayed and accessed on the Router Configuration 
menu (displayed by typing 2 on the Main menu). Tasks in this chapter are 
described beginning at the Router Configuration menu.

You may sign on as Supervisor or Network Manager to configure the IAD 
as a router. Options that display in the Router Configuration menu are the 
same for both security levels. 

To configure the IAD as a router, you must assign an IP address to both 
the LAN and WAN ports—each with different subnet masks. 

To configure an IP address:

1. Type C on the Router Configuration menu to select Configure Port IP 

address.

2. If more than one WAN port is installed or more than one PVC/DLCI 

exists, the IAD displays the interfaces on this IAD (sample shown):
Available Interfaces:

1. SDSL
2. 10/100BaseT Ethernet
0. (Abort)

*******************************************

Router Configuration Menu

*******************************************

C. Configure Port IP Address
U. Unconfigure Port IP Address
M. Configure Port Max Transmission Unit
S. Add/Remove a Static Route
R. Enable/Disable RIP
V. Configure RIP Version by Port
P. Configure RIP Poisoned Reverse by Port
N. Configure DNS Client
H. Configure DHCP Client
L. Configure DHCP Relay
T. Configure Telnet Server Port
F. Configure IP Filtering
Q. Configure IP Header Compression
B. Configure LAN IP Broadcast Destination
D. Display Route Table

 

Be sure to reset the IAD (page

) when after making 

changes to router configuration. Resetting the IAD causes the 
configuration changes to take effect.

 

You can assign up to 8 IP addresses on each of the WAN and 
LAN ports.