Zhone 6219-X1 用户指南
4.
Select the appropriate protocol and define other parameters for the routing rule:
• Source and/or Destination address and/or Subnet Mask
• UDP/TCP Source or Destination port.
• Gateway address or Interface (These can be Active PVCs or Port Mapping Groups)
• UDP/TCP Source or Destination port.
• Gateway address or Interface (These can be Active PVCs or Port Mapping Groups)
5.
Click Save/Apply.
DSL
The DSL settings page contains sections—modulation and capability—that should be specified
by your ISP. Consult with your ISP to select the correct settings for each.
by your ISP. Consult with your ISP to select the correct settings for each.
Click Save / Apply if you are finished or click on Advanced Settings if you want to configure
more advanced settings.
more advanced settings.
Modulation Methods
The following modulation methods are supported by the 6219-X1 router:
• G.dmt Enabled
• G.lite Enabled
• T1.413 Enabled
• ADSL Enabled
• Annex L Enabled
• ADSL2+ Enabled.
• G.lite Enabled
• T1.413 Enabled
• ADSL Enabled
• Annex L Enabled
• ADSL2+ Enabled.
Do not change this setting unless so directed by your ISP.
6219-X1 Router Users Guide
65