Zhone 5100 参考手册
CHAPTER 3
Interfaces
Interfaces
84
Vpacket 5100/6100 Series Reference Manual
Setting the SDSL baud rate
You can set the SDSL baud rate by issuing the set wan baudrate command.
Syntax: set wan baudrate <baudrate>
Argument:
Syntax: set wan baudrate <baudrate>
Argument:
baudrate
the chosen signaling rate appropriate to your network requirements; is
entered in kilobits per second (kbps)
Example::
In this example, the signaling rate is 2320 kbps. The setting 2320 kbps is appropriate for a Lucent
Stinger. You also need to commit and save the changes and then reset the unit.
Viewing ATM virtual circuits
You can view all of the generated default or manually configured virtual circuits (VC) by issuing
the show atm vc command.
Syntax: show atm vc
Example 1:
Syntax: show atm vc
Example 1:
In this example, the generated default VCs are shown.
Example 2:
Example 2:
In this example, the default VCs have been removed and new VCs have been added.
VPacket# set wan baudrate 2320
VPacket#
VPacket# show atm vc
-----------------ATM VC'S---------------
VPI VCI TYPE
ACTIVE 0 102 data
ACTIVE 1 102 voice
----------------------------------------
VPacket#
VPacket# show atm vc
-----------------ATM VC'S---------------
VPI VCI TYPE
ACTIVE 0 103 data
ACTIVE 1 103 voice
----------------------------------------
VPacket#