Zhone 5216 用户手册

TM

Hotwire 5216 Remote Termination Unit (RTU)
Customer Premises
Installation Instructions

Document Number 5216-A2-GN10-10

February 1998

An optional POTS (Plain Old Telephone Service) splitter is available for the 5216 RTU.
When a POTS splitter is installed, the telephone and 5216 RADSL (Rate Adaptive
Digital Subscriber Line) RTU can function at the same time over the same pair of
copper wires. In order to confirm the RTU installation, the POTS splitter should be
installed first.

To install a POTS splitter, refer to the appropriate POTS splitter document:

5030-A2-GN10

Hotwire 5030 POTS Splitter Customer Premises 
Installation Instructions

5034-A2-GN10

Hotwire 5034 Indoor POTS Splitter Customer Premises
Installation Instructions

5038-A2-GN10

Hotwire 5038 Distibuted POTS Splitter Customer Premises
Installation Instructions

Contact your sales or service representative to order additional product documentation.
Paradyne documents are also available on the World Wide Web at:

http://www.paradyne.com

Select 

Service & Support 

→

 Technical Manuals

The following wiring and standard connectors are used with this product:

-

New or existing unshielded twisted-pair wiring (CAT3 or better). The CAT3 wiring
must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or 26 AWG (.4 mm).

-

Standard RJ11 wall jack.

-

Standard Ethernet crossover cable with an 8-pin, non-keyed modular plug for a PC
or workstation. Refer to