Zhone 5100 安装指南

                                                                                                 

You can install the 5100/6100 VDR in the same locations as your hubs, bridges, and routers. This 
would normally be a wiring closet, but it could also be an office space or a desktop.
The following sections describe the topics which can impact your installation of a 5100/6100 

VDR:
•

Preventing electrostatic discharge damage

•

Power considerations

•

Required materials

•

General guidelines

Electrostatic discharge (ESD) is a transfer of electrostatic charge between bodies of different 

electrostatic potentials, such as a person and a piece of electrical equipment. It occurs when 

electronic components are improperly handled, and it can damage equipment and impair electrical 

circuitry. Electrostatic discharge is more likely to occur with the combination of synthetic fibers 

and dry atmosphere.
You can protect the 5100/6100 VDR against damage from electrostatic discharge by always 

following these precautions: 
•

Connect the chassis to earth ground with a wire that you provide. 

•

Do not touch any exposed contact pins or connector shells of interface ports that do not have 
a cable attached. 

•

If cables are connected at one end only, do not touch the exposed pins at the unconnected 
end of the cable.

Caution. Always protect yourself from electrostatic discharge (ESD) by wearing an ESD 

wrist strap.

Warning. Do not open the metal chassis for any reason. If the unit is not functioning 

properly, please call your representative immediately.

!

WARNING