Zhone 6210 用户指南
3. Using the Web Interface
3-18
January 2005
6210-A2-GB23-00
Firewall/NAT Services
To enable or disable Firewall and NAT:
Procedure
1. From the Home screen, click Setup.
2. Under LAN Setup, select Firewall/NAT Services. By unselecting the Enable
Firewall and NAT Services button the firewall and NAT services is disabled for
all WAN connections. Enabling Firewall NAT does not automatically apply it to
connections.
all WAN connections. Enabling Firewall NAT does not automatically apply it to
connections.
Figure 3-12. Firewall/NAT Services Screen
The Apply button will temporarily save this setting. To make the change
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.
permanent, click on Tools (at the top of the page) and select System Commands.
At the System Commands page, click on Save All.