Zhone 6301 用户指南
A. Command Line Interface
6300-A2-GB20-00
March 2002
A-29
show statistics
[
eth1
|
dsl1
|
ip
|
bridge
|
pppoe
|
tftp
]
Minimum Access Level: Operator
Command Mode: Standard
Command Mode: Standard
Displays the specified set of statistics. If no set is specified, ALL statistics for the router
are shown except:
are shown except:
TFTP statistics.
Bridge statistics are only displayed when bridging is enabled.
PPPoE statistics are only displayed when the PPPoE client is enabled.
eth1 – Ethernet interface statistics.
dsl1 – DSL interface statistics.
ip – IP processing statistics.
bridge – Bridge statistics.
pppoe – PPPoE statistics.
tftp – TFTP statistics.
show statistics eth1
The following statistics are displayed for
show statistics eth1
:
eth1 statistics:
Total Bytes Received
nnnn
Total Bytes Transmitted
nnnn
Total Frames Received
nnnn
Total Frames Transmitted
nnnn
Single Collision on Tx
nnnn
Multiple Collision on Tx
nnnn
Late Collision on Tx
nnnn
No Carrier Detect on Tx
nnnn
Pauses on Tx
nnnn
Defers on Tx
nnnn
Total Frames Discarded
nnnn
Zero valued discards are not shown
Refer to
Monitoring the DSL Router, for additional information.
(Continued on next page)
Table A-17. Show Commands (7 of 10)