Zhone 6300 用户手册
3. Configuring the DSL Router
6300-A2-GB20-10
November 2003
3-9
Dynamic Host Configuration Protocol (DHCP) Server
The router provides a DHCP Server feature, as specified in RFC 2131, Dynamic
Host Configuration Protocol, and RFC 2132, DHCP Option and BOOTP Vendor
Extensions. DHCP is the protocol used for automatic IP address assignment.
Host Configuration Protocol, and RFC 2132, DHCP Option and BOOTP Vendor
Extensions. DHCP is the protocol used for automatic IP address assignment.
DHCP setup considerations:
The range of IP addresses to be used by the DHCP server must be
configured. The maximum number of clients is 256.
configured. The maximum number of clients is 256.
The DHCP server is not activated until one IP address and subnet mask are
assigned to the Ethernet interface and routing is enabled.
assigned to the Ethernet interface and routing is enabled.
The DHCP server must be enabled, and the DHCP server and DHCP relay
functions cannot be enabled at the same time.
functions cannot be enabled at the same time.
When the DHCP IP address range is changed, all binding entries,
automatically added routes, and ARP Table entries for the clients configured
with the old address range are removed.
automatically added routes, and ARP Table entries for the clients configured
with the old address range are removed.
When the DHCP Server is enabled, there can be only one IP address
configured for the service domain (Ethernet interface).
configured for the service domain (Ethernet interface).
The IP address for the next hop router provided to the hosts in the DHCP reply
must be configured.
must be configured.
The subnet mask can be configured along with the IP address range
(optional).
(optional).
The DHCP server domain name can be configured (optional).
The Domain Name Server (DNS) IP address can be configured (optional).
A minimum and maximum lease time setting can be configured.