Zhone 6301 安装指导
3
7. The rights granted under this Agreement may not be assigned, sublicensed or
otherwise transferred by the Licensee to any third party without the prior written
consent of Paradyne.
consent of Paradyne.
8. This Agreement and the license granted under this Agreement shall be terminated
in the event of breach by the Licensee of any provisions of this Agreement.
9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the possession of
Licensee together with all documentation and related materials.
Licensee together with all documentation and related materials.
10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.
Product Documentation Online
Complete documentation for this product is available at www.paradyne.com.
Select Library
Select Library
→ Technical Manuals → Hotwire DSL Systems.
To order a paper copy of a Paradyne document, or to speak with a sales representative,
please call 1-727-530-2000.
please call 1-727-530-2000.
Hotwire 6351 ReachDSL Router Overview
The Hotwire
®
6351 ReachDSL
™
Router is a component in the Hotwire ReachDSL
System that interoperates with Hotwire 8312 and 8314 ReachDSL cards in the Digital
Subscriber Line Access Multiplexer (DSLAM) system.
Subscriber Line Access Multiplexer (DSLAM) system.
The ReachDSL Router operates as an IP router, connecting a DSL link to an Ethernet
network to provide high-speed Internet or corporate LAN access over traditional
twisted-pair copper telephone wiring. ReachDSL technology operates over existing
copper wire with existing telephone jacks to provide adaptive rates, and to dynamically
adapt and allocate bandwidth to optimize applications.
network to provide high-speed Internet or corporate LAN access over traditional
twisted-pair copper telephone wiring. ReachDSL technology operates over existing
copper wire with existing telephone jacks to provide adaptive rates, and to dynamically
adapt and allocate bandwidth to optimize applications.
Hotwire ReachDSL System
Copper pairs run from the central office (CO) to the customer premises (CP) to create
the local loop. The local loop terminates on the customer premises at the demarcation
point.
the local loop. The local loop terminates on the customer premises at the demarcation
point.
For more information about Hotwire DSL Routers, refer to the following document:
6371-A2-GB20
Hotwire DSL Routers User’s Guide
To install a phone filter, refer to the appropriate document:
6035-A2-GN11
Hotwire 6035 Universal Phone Filter Installation Instructions
6040-A2-GN11
Hotwire 6040 Universal Wall Jack Phone Filter Installation
Instructions
Instructions