Zhone 6382 用户手册

3. Using the Web Interface

To configure LAN parameters, click on Setup on the Home screen. Under LAN 
Setup, click on LAN Configuration. The LAN Configuration screen appears.

By default, your CPE has DHCP server (LAN side) disabled. If you already have a 
DHCP server running on your network, do not enable a second DHCP server. 

To enable DHCP:

1. From the Home screen, click on Setup. 

2. Under LAN Setup, select LAN Configuration. The LAN Group 1 Configuration 

screen appears.

3. The DHCP server is enabled when “Enable DHCP Server” is selected. If you 

enable it:

— Specify a Start IP address. The Start IP Address is where the DHCP 

server starts issuing IP addresses. This value must be greater than the 
router's IP address value. For example, if the router's IP address is