Zhone 5620 安装指导
5
Getting Started
Before beginning your RTU’s installation, make sure that you have all the equipment you
will need.
will need.
Package Checklist
In addition to these instructions, verify that your package contains the following:
❑
Model 5620 Remote Termination Unit (RTU)
❑
DSL interface cable with RJ11 modular plugs
❑
Power cord with power transformer
Wiring and Connectors You Will Need
The following wiring and standard connectors are used with this product:
❑
Standard RJ11 wall jack for the DSL cabling.
❑
Multiple line adapter if a telephone and RTU are connected in the same location.
❑
DSL cabling: New or existing unshielded twisted-pair wiring (CAT3 or better). The
CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
CAT3 wiring must meet EIA/TIA-568 specifications with 24 AWG (.5 mm) or
26 AWG (.4 mm).
❑
Ethernet cabling: Standard Ethernet 8-pin, non-keyed modular plug for a PC or
workstation. An Ethernet straight-through or crossover cable is used. Refer to
procedures in
workstation. An Ethernet straight-through or crossover cable is used. Refer to
procedures in
on page 9 for Ethernet cable details.
on page 15 for standard pin numbers.