Zhone 7995 安装指导
10
Hotwire TDM SHDSL Endpoints
7990-A2-ZN10-30
Entering Identity Information
After accessing your unit for the first time, use the Change Identity screen to determine SNMP
administrative system information that will be displayed on the Identity screen of the Status
branch. To access the Identity screen, follow this menu selection sequence:
administrative system information that will be displayed on the Identity screen of the Status
branch. To access the Identity screen, follow this menu selection sequence:
Main Menu
→ Control → Change Identity
Selecting a Configuration Method
You can make configuration changes either through a VT100-compatible terminal and the unit’s
Configuration menus or by manually changing switches on the board. The unit is shipped with
the switchpacks disabled to allow settings to be made through the Configuration menus. See the
User’s Guide for detailed information about the configuration options and switch settings.
Configuration menus or by manually changing switches on the board. The unit is shipped with
the switchpacks disabled to allow settings to be made through the Configuration menus. See the
User’s Guide for detailed information about the configuration options and switch settings.
Configuring the Unit Using the
Configuration Menus
Use the Configuration menu to select, display, or change configuration option settings.
NOTE:
The Hotwire 799x endpoint is shipped configured as an STU-R. If you use this unit as an
The Hotwire 799x endpoint is shipped configured as an STU-R. If you use this unit as an
STU-R, the configuration options may not need to be altered.
The unit has two sets of configuration option settings:
z
The Current Configuration: The unit’s active set of configuration options.
z
The Default Factory Configuration: A read-only configuration area containing the factory
default configuration options.