Zhone 7995 用户指南
A. Configuration Options
A-24
May 2002
7990-A2-GB20-00
Table A-9.
Communication Protocol Options (1 of 2)
Node IP Address
Possible Settings: 001.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
Default Setting: 000.000.000.000
Specifies the Node IP address. The IP address is not bound to a particular port, and can
be used for remote access over the EOC.
be used for remote access over the EOC.
Node IP Address only appears when DSL Mode is set to STU-C (see
001.000.000.000 – 223.255.255.255 – Enter an IP address for the node. The range for
the first byte is 001 to 223, with the exception of 127. The range for the remaining three
bytes is 000 to 255.
the first byte is 001 to 223, with the exception of 127. The range for the remaining three
bytes is 000 to 255.
Clear – Clears the IP address field to all zeros.
Node Subnet Mask
Possible Settings: 000.000.000.000 – 255.255.255.255, Clear
Default Setting: 000.000.000.000
Default Setting: 000.000.000.000
Specifies the Node Subnet Mask.
Node Subnet Mask only appears when DSL Mode is set to STU-C (see
000.000.000.000 – 255.255.255.255 – Enter an address for the Node Subnet Mask.
Clear – Clears the mask to all zeros.
Default Network Destination
Possible Settings: None, COM, DSL
Default Setting: None
Default Setting: None
Specifies where the default management network is connected. For example, if your
default network is connected to the COM port, select COM as the default management
network destination.
default network is connected to the COM port, select COM as the default management
network destination.
None – No default destination is defined. Data that cannot be routed is discarded.
COM – The unit’s COM port is the default network destination.
COM only appears when Port Use is set to Net Link (see
DSL – The unit’s DSL port is the default network destination.
Communication Port IP Address
Possible Settings: 001.000.000.000 – 223.255.255.255, Clear
Default Setting: 000.000.000.000
Default Setting: 000.000.000.000
Specifies the unit’s Communication Port IP Address when the unit is configured as a
network communication link.
network communication link.
Communication Port IP Address only appears when Port Use is set to Net Link (see
). If the COM Port IP address is not set
(000.000.000.000), the node IP Address and subnet mask are used.
001.000.000.000 – 223.255.255.255 – Enter an IP address for the Communication Port.
The range for the first byte is 001 to 223, with the exception of 127. The range for the
remaining three bytes is 000 to 255.
The range for the first byte is 001 to 223, with the exception of 127. The range for the
remaining three bytes is 000 to 255.
Clear – Clears the IP to all zeros.