Zhone 7995 用户指南
B. Standards Compliance for SNMP Traps
B-6
May 2002
7990-A2-GB20-00
enterpriseFallback
AutoRate(13)
AutoRate(13)
After a loss of signal, the unit
resynchronized to a lower
rate than the last known rate.
resynchronized to a lower
rate than the last known rate.
Variable bindings:
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
Variable line conditions.
enterprisePrimary-
ClockFailClear(101)
ClockFailClear(101)
The STU-C has recovered
and is using its primary clock
source.
and is using its primary clock
source.
No variable bindings.
—
enterpriseSecondary-
ClockFailClear(104)
ClockFailClear(104)
The STU-C has recovered
and is using its secondary
clock source.
and is using its secondary
clock source.
No variable bindings.
—
enterpriseTest-
Stop(105)
Stop(105)
All tests have been halted.
Variable bindings:
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
ifTestType (RFC 1573)
All tests on an interface have
been stopped by timeout or an
Abort All Tests command.
been stopped by timeout or an
Abort All Tests command.
enterpriseFallback
AutoRateClear(113)
AutoRateClear(113)
After an AutoRate fallback
condition, the unit
resynchronized to the
last known rate.
condition, the unit
resynchronized to the
last known rate.
Variable bindings:
ifIndex (RFC 1573)
ifAdminStatus
(RFC 1573)
(RFC 1573)
ifOperStatus (RFC 1573)
ifType (RFC 1573)
The units automatically
retrained at the same rate, were
reset, or placed in fixed rate.
retrained at the same rate, were
reset, or placed in fixed rate.
Table B-5.
Enterprise-Specific Traps (2 of 2)
SNMP Trap
Description
Possible Cause