Zhone 7995 用户指南
3. Initial Startup and Configuration
7990-A2-GB20-00
May 2002
3-17
5. Position the cursor at the Start Transfer field. Use the spacebar to select Yes.
Press Enter.
When the data transfer is complete:
— If you selected Yes in Step 4, the unit is reset.
— If you selected No in Step 4, the Transfer Status field changes to
Completed successfully
.
If you specified No (the default) in the Immediately Apply Download field in
Step 4 above, you must now apply the download.
Step 4 above, you must now apply the download.
Procedure
To apply the downloaded firmware:
1. Press the Escape key to return to the Control menu. Select Apply Download.
2. On the Apply Download screen, type Yes to reset the card and activate the
code.
Selecting Yes causes the TDM SHDSL endpoint to reset.
NOTE:
The unit has two flash memory banks to hold executable firmware. You can
switch between these two firmware versions by applying the firmware listed on
the Apply Download screen.
switch between these two firmware versions by applying the firmware listed on
the Apply Download screen.
main/control/apply_download
Model: 799x
APPLY DOWNLOAD
Switch To Code Revision A01.00.02: No
WARNING:
An answer of “yes” will cause the system
to reset as if it had been powered off and on!
-------------------------------------------------------------------------------
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Select: Yes, No LOS at Net, Pt 1