Zhone 2004 用户指南
3-6
2 0 0 0 - A 2 - G B 2 2 - 0 0
•
System Contact
•
System Name
•
System Location
•
SNMP Community
•
SNMP Trap Host IP Address
The following SNMP traps are supported:
•
System reset
•
Attempts to access SNMP with an invalid community name
•
Starting and stopping TFTP within SNMP
The IAD supports MIBs for RFCs 1213, 1317, 1406, 1493, and 1463 as well
as af-vmoa-0174 (AAL2/LES MIB).
as af-vmoa-0174 (AAL2/LES MIB).
SNMP Configuration Menu
To display the SNMP Configuration menu, type “7” on the Main menu. Each
of the menu’s configuration options is described below.
of the menu’s configuration options is described below.
Figure 3.2
SNMP Configuration Menu
NOTICE:
The strings you enter in SNMP are not case sensitive.
Enable/Disable SNMP via IP
To Enable or Disable SNMP via IP, follow the steps below.
1
Type “E” on the SNMP Configuration menu to enable or disable SNMP via
IP. The IAD displays the current status of SNMP.
IP. The IAD displays the current status of SNMP.
2
To enable SNMP, type “E” or “D” to disable. The IAD saves the
configuration (if changed).
configuration (if changed).