Zhone 2208 用户指南

To clear interface statistics, type “Z” on the Interface Statistics menu. The 

IAD displays the Clear Statistics menu:

To reset statistics for a specific interface, type the option. 
The IAD immediately resets the statistics for the specified interface, and 
displays the menu. Continue resetting statistics, or press Escape to return to 
the Interface Statistics menu.

bridge packets received and 
discarded

Discarded received packets due to lack of packet 
buffers or Spanning Tree packets arrived on an 
interface, when Spanning Tree is not enabled.

bridge packets sent to one 
other port

No. of bridge packets sent to a proper low-level output 
port.

bridge packets sent to all 
other ports

No. of bridge packets sent to all other bridge ports.

bridge packets sent

Total bridge packets sent.

bridge octects sent

Total octets/bytes of bridge packets sent.

discarded for lack of 
resources

Discarded transmitted packets due to lack of resources 
(kernel memory, packet buffers, etc.)

spanning tree config packets 
received

No. of Spanning Tree Configuration packets received.

spanning tree topology 
change packets received

No. of Spanning Tree Topology Change packets 
received.

spanning tree invalid packets 
received

No. of invalid Spanning Tree packets, such as Wrong 
LSAP, Control, Protocol ID, Version, Length, and 
Message Type value.

spanning tree config packets 
sent

No. of Spanning Tree Configuration packets sent.

spanning tree topology 
change packets sent

No. of Spanning Tree Topology Change packets sent.