Zhone 2208 用户指南
A d m i n i s t r a t i o n
3-21
Perform a hard reset to reset the IAD (page 3-16) whenever you load a new
version of boot ROM. Performing a normal reset is not recommended.
version of boot ROM. Performing a normal reset is not recommended.
Update ACOS [acos.bin]
1
Type “O” on the File Transfer menu to display the File Transfer Method
menu and download the Atlas Communications Operating System (ACOS)
to the file system in Flash memory on the IAD. The file is stored on the IAD
as acos.bin. The IAD displays the File Transfer Method menu.
2
Type “1” to use TFTP, or “2” to use XMODEM to transfer the new
version of ACOS to the IAD. If you select XMODEM, proceed to step 5
below.
3
The IAD prompts you to enter the IP address of the TFTP server.
4
Type the IP address of the TFTP server and press Enter. The IAD displays
the following prompt for the file name to transfer:
5
Type the name of the file and press Enter. To exit without transferring the
file, press Escape or Enter without typing the file name. When XMODEM is
selected, if the file is not located, the IAD prompts you for the file transfer
speed. The IAD transfers the file via TFTP or XMODEM.
Perform a hard reset (page 3-16) to reset the IAD whenever you load a new
version of ACOS. Performing a normal reset is not recommended.
version of ACOS. Performing a normal reset is not recommended.
Update Entire System
1
Type “X” on the File Transfer menu to update the IAD by transferring the
upgrade package of files provided by Paradyne. The number and type of
files varies by IAD. The IAD uses TFTP to download files sequentially to
the IAD. The IAD displays a confirmation prompt.
2
Type “y” to continue, or any other character to escape. The IAD prompts
you for the IP address of the TFTP Server.
3
Type the IP address of the TFTP server and press Enter. The IAD transfers
each of the system files.
When the file transfers are complete, perform a hard reset (page 3-16) to
restart the IAD. Performing a normal reset after updating the system is not
recommended.
restart the IAD. Performing a normal reset after updating the system is not
recommended.
File Transfer Utilities
To perform file transfers for any files, type “A” on the File Transfer menu to
display the File Transfer Method menu to download a file to the file system in
the IAD. The IAD displays the File Method menu.
the IAD. The IAD displays the File Method menu.
1
Type “1” to use TFTP, or “2” to use XMODEM to transfer the file to the
IAD. If you select XMODEM, proceed to step 3. The IAD prompts you to
enter the IP address of the TFTP server.