Zhone 2208 用户指南

P r e f a c e

This reference guide for the 2208, 2304, and 2308 IADs describes features 
and specifications, configuration, and cabling. This manual is designed to be 
used as a reference regarding commands, interface ports, configuration 
parameters, and other information specific to your IAD.

The chapters and appendices in this manual are arranged for quick reference 
when you need it. We recommend that you first read the Quick Start Guide 
and then refer to the remaining chapters for more detailed information. 
Appendices are designed to complement the main chapters. 

•

Chapter 1, "Introduction" – introduces the features of the 2208, 2304, and 

2308 IADs, including the hardware, indicators, and ports. 

•

Chapter 2, "Quick Start Guide" – describes the process of getting an IAD up 

and running in a typical customer premises. This chapter is helpful if you’re 

new to Paradyne IADs, because it lists each step, beginning with unpacking 

the IAD. It also provides information about logging on, using the menu 

interface, setting the IP address, basic configuration tasks, and restarting the 

IAD. The subsequent chapters provide more detailed information. 

•

Chapter 3, "Administration" – provides information about security, 

configuring Simple Network Management Protocol (SNMP), upgrading 

ACOS, system utilities, and other topics. 

•

Chapter 4, "Configuration" – details how to configure the IADs for physical 

connection to the network (T1/E1 and SDSL, frame relay and ATM, and 

TDM voice for channelized T1/E1 circuits) as well as router, bridge, voice 

path, firewall, DHCP, Multicast, and NAT configuration. 

•

− describes the reports you can run.

•

Chapter 6, "Command Line Interface" – describes how to enter and exit CLI 

mode, and how to use each command in the command line interface. You 

may use these commands instead of using the corresponding commands in 

the menu interface.