Zhone 2208 用户指南

C o n f i g u r a t i o n

Type the value for the Peak Cell Rate. The IAD saves the configuration and 

displays the PVC Configuration menu where you may continue with other 

PVC management tasks.

Modify Existing PVC
1

Type “2” on the ATM PVC Configuration menu (Figure 4.23). The IAD 

displays the following port table, and prompts you to select the appropriate 

port.

Type the port number and press Enter.The IAD prompts you to enter the 

VPI:

Type a VPI value between 0 and 255 (default 0) and press Enter. The IAD 

then prompts you to enter the VCI:

Type a VCI value between 32 and 65535 (the default is 38 for data and 39 

for voice) and press Enter. The IAD displays the ATM Encapsulation 

Configuration menu (Figure 4.24).

Select the encapsulation you want to assign to this PVC in accordance with 
the following paragraphs.