ZyXEL p-660h-61 用户指南

Prestige 660H Series User’s Guide 

22-2 

Menu 2 WAN Backup Setup 

Recovery Interval(sec) 

When the Prestige is using a lower priority connection (usually a WAN backup 
connection), it periodically checks to whether or not it can use a higher priority 
connection. 

Type the number of seconds (30 recommended) for the Prestige to wait between 
checks. Allow more time if your destination IP address handles lots of traffic. 

ICMP Timeout 

Type the number of seconds for an ICMP session to wait for the ICMP response. 

Traffic Redirect 

Press [SPACE BAR] to select Yes or No.  

Select Yes and press [ENTER] to configure Menu 2.1 Traffic Redirect Setup. 

Select No (default) if you do not want to configure this feature.  

When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save your 
configuration, or press [ESC] at any time to cancel. 

Configure parameters that determine when the Prestige will forward WAN traffic to the backup 
gateway using Menu 2.1 — Traffic Redirect Setup.  

 

 

 

 

 

 

 

 

The following table describes the fields in this menu. 

Active 

Press [SPACE BAR] and select Yes (to enable) or No (to disable) traffic redirect setup. The 
default is No. 

Configuration: 

Backup Gateway 
IP Address 

Enter the IP address of your backup gateway in dotted decimal notation. 

The Prestige automatically forwards traffic to this IP address if the Prestige’s Internet 
connection terminates.  

 
           Menu 2.1 - Traffic Redirect Setup 
 
       Active= No 
       Configuration: 
         Backup Gateway IP Address= 0.0.0.0 
         Metric= 15 
 
 
       Press ENTER to Confirm or ESC to Cancel: