ZyXEL p-660h-61 用户指南
Prestige 660H Series User’s Guide
Remote Node Configuration
25-7
Figure 25-4 Sample IP Addresses for a TCP/IP LAN-to-LAN Connection
25.4 Remote Node Filter
Move the cursor to the Edit Filter Sets field in menu 11.1, then press [SPACE BAR] to select Yes.
Press [ENTER] to display Menu 11.5 – Remote Node Filter.
Press [ENTER] to display Menu 11.5 – Remote Node Filter.
Use Menu 11.5 – Remote Node Filter to specify the filter set(s) to apply to the incoming and
outgoing traffic between this remote node and the Prestige and also to prevent certain packets from
triggering calls. You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in
each filter field.
outgoing traffic between this remote node and the Prestige and also to prevent certain packets from
triggering calls. You can specify up to 4 filter sets separated by comma, for example, 1, 5, 9, 12, in
each filter field.
Note that spaces are accepted in this field. The Prestige has a prepackaged filter set, NetBIOS_WAN,
that blocks NetBIOS packets. Include this in the call filter sets if you want to prevent NetBIOS packets
from triggering calls to a remote node.
that blocks NetBIOS packets. Include this in the call filter sets if you want to prevent NetBIOS packets
from triggering calls to a remote node.
Figure 25-5 Menu 11.5 Remote Node Filter (RFC 1483 or ENET Encapsulation)
Menu 11.5 - Remote Node Filter
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL:
Input Filter Sets:
protocol filters=
device filters=
Output Filter Sets:
protocol filters=
device filters=
Enter here to CONFIRM or ESC to CANCEL: