ZyXEL nbg-4615 用户指南
Chapter 13 Tutorials
NBG4615 User’s Guide
112
13.2.1 Push Button Configuration (PBC)
1
Make sure that your NBG4615 is turned on. Make sure the WLAN switch (at the
back panel of the NBG4615) is set to ON, and that the device is placed within
range of your computer.
back panel of the NBG4615) is set to ON, and that the device is placed within
range of your computer.
2
Make sure that you have installed the wireless client (this example uses the
NWD210N) driver and utility in your notebook.
NWD210N) driver and utility in your notebook.
3
In the wireless client utility, find the WPS settings. Enable WPS and press the WPS
button (Start or WPS button)
button (Start or WPS button)
4
Log into NBG4615’s Web Configurator and press the Push Button in the
Configuration > Network > Wireless Client > WPS Station screen.
Configuration > Network > Wireless Client > WPS Station screen.
Note: Your NBG4615 has a WPS button located on its back panel, as well as a WPS
button in its configuration utility. Both buttons have exactly the same function;
you can use one or the other.
you can use one or the other.
Note: It doesn’t matter which button is pressed first. You must press the second
button within two minutes of pressing the first one.
The NBG4615 sends the proper configuration settings to the wireless client. This
may take up to two minutes. Then the wireless client is able to communicate with
the NBG4615 securely.
may take up to two minutes. Then the wireless client is able to communicate with
the NBG4615 securely.