ZyXEL nbg-4615 用户指南
Chapter 13 Tutorials
NBG4615 User’s Guide
119
For example, you may set up three wireless networks (A, B and C) in your office.
A is for workers, B is for guests and C is specific to a VoIP device in the meeting
room.
A is for workers, B is for guests and C is specific to a VoIP device in the meeting
room.
13.4.1 Configuring Security Settings of Multiple SSIDs
The NBG4615 is in access point mode by default. If you want to use multiple
SSIDs when the NBG4615 is in universal repeater mode, see
SSIDs when the NBG4615 is in universal repeater mode, see
Chapter 8 on page
81
for how to set the NBG4615 to universal repeater mode.
This example shows you how to configure the SSIDs with the following parameters
on your NBG4615 (in access point mode).
on your NBG4615 (in access point mode).
1
Connect your computer to the LAN port of the NBG4615 using an Ethernet cable.
2
The default IP address of the NBG4615 is “192.168.1.2”. In this case, your
computer must have an IP address in the range between “192.168.1.3” and
“192.168.1.254”.
computer must have an IP address in the range between “192.168.1.3” and
“192.168.1.254”.
A
B
C
SSID_Guest
SSID_Worker
SSID_VoIP
SSID
SECURITY TYPE
KEY
MAC FILTERING
SSID_Worker
WPA2-PSK
WPA Compatible
DoNotStealMyWireless
Network
Network
Disable
SSID_Guest
Static WEP 128bit
keyexample123
Disable
SSID_VoIP
WPA-PSK
VoIPOnly12345678
Allow
00:A0:C5:01:23:45