ZyXEL nbg-4615 用户指南

Chapter 15 IPv6

NBG4615 User’s Guide

Click Network > IPv6 to open the IPv6 screen. Use this screen to configure the 
IPv6 settings for your NBG4615.

Figure 86   Network > IPv6 

The following table describes the fields in this screen.  

Table 53   Network > IPv6

IPv6 Connection Type Setup
IPv6 Connection 
Type

Select the IPv6 connection type:

• Ethernet: Select this if your ISP provides you a static IPv6 

address. You need to enter the IPv6 information below according 

to what your ISP provided. 

• Link-local only: Use this connection mode for the NBG4615 to 

communicate with other IPv6 devices on the LAN side. You do not 

need to configure the settings below if you choose this mode.

WAN IPv6 Address Setup
IPv6 Address

Enter the static IPv6 address provided by your ISP using colon (:) 
hexadecimal notation.

Subnet Prefix 
Length

Enter the bit number of the IPv6 subnet mask provided by your ISP.

Gateway IP 
Address

Enter the IPv6 address of the default outgoing gateway using a colon 
(:) hexadecimal notation.