ZyXEL nbg-4615 用户指南
Chapter 25 Bandwidth Management
NBG4615 User’s Guide
206
• Use the Monitor screen to view the amount of network bandwidth that
applications running in the network are using (
).
25.3 What You Need To Know
The sum of the bandwidth allotments that apply to the WAN interface (LAN to
WAN, WLAN to WAN) must be less than or equal to the Upstream Bandwidth
that you configure in the Bandwidth Management Advanced screen (
WAN, WLAN to WAN) must be less than or equal to the Upstream Bandwidth
that you configure in the Bandwidth Management Advanced screen (
).
The sum of the bandwidth allotments that apply to the LAN interface (WAN to
LAN, WAN to WLAN) must be less than or equal to the Downstream Bandwidth
that you configure in the Bandwidth Management Advanced screen
LAN, WAN to WLAN) must be less than or equal to the Downstream Bandwidth
that you configure in the Bandwidth Management Advanced screen
.
25.4 General Screen
Use this screen to have the NBG4615 apply bandwidth management.
Click Management > Bandwidth MGMT to open the bandwidth management
General screen.
General screen.
Figure 117 Management > Bandwidth Management > General
The following table describes the labels in this screen.
Table 74 Management > Bandwidth Management > General
LABEL
DESCRIPTION
Enable
Bandwidth
Management
Bandwidth
Management
This field allows you to have NBG4615 apply bandwidth management.
Enable bandwidth management to give traffic that matches a
bandwidth rule priority over traffic that does not match a bandwidth
rule.
bandwidth rule priority over traffic that does not match a bandwidth
rule.
Enabling bandwidth management also allows you to control the
maximum or minimum amounts of bandwidth that can be used by
traffic that matches a bandwidth rule.
maximum or minimum amounts of bandwidth that can be used by
traffic that matches a bandwidth rule.