ZyXEL nbg-4615 用户指南
Chapter 28 Maintenance
NBG4615 User’s Guide
226
28.3 General Screen
Use this screen to set the management session timeout period. Click
Maintenance > General. The following screen displays.
Maintenance > General. The following screen displays.
Figure 133 Maintenance > General
The following table describes the labels in this screen.
28.4 Password Screen
It is strongly recommended that you change your NBG4615's password.
If you forget your NBG4615's password (or IP address), you will need to reset the
device. See
device. See
for details.
Table 81 Maintenance > General
LABEL
DESCRIPTION
System Setup
System Name
System Name
System Name is a unique name to identify the NBG4615 in an
Ethernet network.
Ethernet network.
Domain Name
Enter the domain name you want to give to the NBG4615.
Administrator
Inactivity Timer
Inactivity Timer
Type how many minutes a management session can be left idle before
the session times out. The default is 5 minutes. After it times out you
have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never
times out, no matter how long it has been left idle (not
recommended).
the session times out. The default is 5 minutes. After it times out you
have to log in with your password again. Very long idle timeouts may
have security risks. A value of "0" means a management session never
times out, no matter how long it has been left idle (not
recommended).
Apply
Click Apply to save your changes back to the NBG4615.
Cancel
Click Cancel to begin configuring this screen afresh.