ZyXEL nbg-4615 用户指南

 Chapter 10 Access Point Mode

NBG4615 User’s Guide

Log in to the Web Configurator in Access Point mode, do the following:

Connect your computer to the LAN port of the NBG4615. 

The default IP address of the NBG4615 is “192.168.1.2”. In this case, your 
computer must have an IP address in the range between “192.168.1.3” and 
“192.168.1.254”.

Click Start > Run on your computer in Windows. Type “cmd” in the dialog box. 
Enter “ipconfig” to show your computer’s IP address. If your computer’s IP 
address is not in the correct range then see 

 for 

information on changing your computer’s IP address.

After you’ve set your computer’s IP address, open a web browser such as Internet 
Explorer and type “192.168.1.2” as the web address in your web browser.

Note: After clicking Login, the Easy mode appears. Refer to 

 for 

the Easy mode screens. Change to Expert mode to see the screens described 
in the sections following this.

The configuration of wireless, bandwidth management and maintenance settings 
in Access Point mode is the same as for Router Mode.

• See 

 for information on the configuring your wireless 

network.

• See 

 for information on configuring your Bandwidth 

Management screen. 

• See 

 for information on configuring your Maintenance 

settings.