ZyXEL nbg-4615 用户指南

 Chapter 11 Universal Repeater Mode

NBG4615 User’s Guide

Figure 61   Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-

PSK 

The following table describes the labels in this screen. 

WEP Key 1 ~ 
WEP Key 4

The WEP keys are used to encrypt data. Both the NBG4615 and the 
access point must use the same WEP key for data transmission.

If you chose HEX, enter 10 or 26 hexadecimal characters in the range of 
"A-F", "a-f" and "0-9" (for example, 11AA22BB33) for a 64-bit or 128-bit 
WEP key respectively.

If you chose ASCII, enter any 5 or 13 ASCII characters (case sensitive) 
ranging from "a-z", "A-Z" and "0-9" (for example, MyKey) for a 64-bit or 
128-bit WEP key respectively. 

You must configure at least one key, only one key can be activated at any 
one time.

Apply

Click Apply to save your changes back to the NBG4615.

Cancel

Click Cancel to reload the previous configuration for this screen.

Table 33   Universal Repeater Mode: Wireless LAN > Universal Repeater: Static WEP 
(continued)

Table 34   Universal Repeater Mode: Wireless LAN > Universal Repeater: WPA(2)-
PSK

Universal Repeater Parameters 
Enable 

Select this option to have the NBG4615 connect to the specified access 
point.

SSID

Enter the name of the access point to which you are connecting.

MAC Address 
(Optional)

Enter the MAC address of the access point to which you are connecting.

Security Mode

Select WPA-PSK or WPA2-PSK if the access point to which you want to 
connect uses WPA-PSK or WPA2-PSK.