ZyXEL p-660hw-61 发行公告
ZyXEL Confidential
340PE10C0.doc
41/42
(the lowest) to 7 (the highest). The priority is
unchanged if the user doesn’t set a new value.
unchanged if the user doesn’t set a new value.
<borrow on|off>
The class can borrow bandwidth from its parent
class when the borrow is set on, and vice versa.
The borrow is unchanged if the user doesn’t set a
new value.
class when the borrow is set on, and vice versa.
The borrow is unchanged if the user doesn’t set a
new value.
del #
Delete the class # and its filter and all its children
class and their filters in LAN.
class and their filters in LAN.
wlan
add #
bandwidth xxx
<name xxx>
Add a class with bandwidth xxx bps in WLAN.
The name is for users’ information.
The name is for users’ information.
<priority x>
Set the class’ priority. The range is between 0
(the lowest) to 7 (the highest). The default value
is 3.
(the lowest) to 7 (the highest). The default value
is 3.
<borrow
on|off>
on|off>
The class can borrow bandwidth from its parent
class when the borrow is set on, and vice versa.
The default value is off.
class when the borrow is set on, and vice versa.
The default value is off.
mod #
<bandwidth xxx>
Modify the parameters of the class in WLAN.
The bandwidth is unchanged if the user doesn’t
set a new value.
The bandwidth is unchanged if the user doesn’t
set a new value.
<name xxx>
Set the class’ name.
<priority x>
Set the class’ priority. The range is between 0
(the lowest) to 7 (the highest). The priority is
unchanged if the user doesn’t set a new value.
(the lowest) to 7 (the highest). The priority is
unchanged if the user doesn’t set a new value.
<borrow on|off>
The class can borrow bandwidth from its parent
class when the borrow is set on, and vice versa.
The borrow is unchanged if the user doesn’t set a
new value.
class when the borrow is set on, and vice versa.
The borrow is unchanged if the user doesn’t set a
new value.
del #
Delete the class # and its filter and all its children
class and their filters in WLAN.
class and their filters in WLAN.
mpoa[00~
07]
07]
add #
bandwidth xxx
<name xxx>
Add a class with bandwidth xxx bps in WAN.
The name is for users’ information.
The name is for users’ information.
<priority x>
Set the class’ priority. The range is between 0
(the lowest) to 7 (the highest). The default value
is 3.
(the lowest) to 7 (the highest). The default value
is 3.
<borrow
on|off>
on|off>
The class can borrow bandwidth from its parent
class when the borrow is set on, and vice versa.
The default value is off.
class when the borrow is set on, and vice versa.
The default value is off.
mod #
<bandwidth xxx>
Modify the parameters of the class in WAN. The
bandwidth is unchanged if the user doesn’t set a
new value.
bandwidth is unchanged if the user doesn’t set a
new value.
<name xxx>
Set the class’ name.
<priority x>
Set the class’ priority. The range is between 0
(the lowest) to 7 (the highest). The priority is
unchanged if the user doesn’t set a new value.
(the lowest) to 7 (the highest). The priority is
unchanged if the user doesn’t set a new value.
<borrow on|off>
The class can borrow bandwidth from its parent
class when the borrow is set on, and vice versa.
The borrow is unchanged if the user doesn’t set a
new value.
class when the borrow is set on, and vice versa.
The borrow is unchanged if the user doesn’t set a
new value.
del #
Delete the class # and its filter and all its children
class and their filters in WAN.
class and their filters in WAN.
filter
lan
add #
Daddr <mask
Dmask> Dport Saddr
<mask Smask> Sport
protocol
Dmask> Dport Saddr
<mask Smask> Sport
protocol
Add a filter for class # in LAN. The filter
contains destination address (netmask),
destination port, source address (netmask),
source port and protocol. You may set the value
as 0 if you do not care the item.
contains destination address (netmask),
destination port, source address (netmask),
source port and protocol. You may set the value
as 0 if you do not care the item.