ZyXEL p-330w 用户指南
ZyXEL P-330W User’s Guide
97
Chapter 7 Administrator Options
Figure 61 Administrator: Time Zone Setting
The following table describes the labels in this screen.
7.9 Upgrade Firmware
Find firmware at
www.us.zyxel.com
in a file that (usually) uses the system model name with a
"*.bin" extension, e.g., "P-330W.bin". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Administrator, and then the Upgrade Firmware link. Follow the instructions in this
screen to upload firmware to your P-330W.
screen to upload firmware to your P-330W.
Table 47 Administrator: Time Zone Setting
LABEL
DESCRIPTION
Current Time
This field displays the time of your P-330W.
If you are not using an NTP server, you can make changes here and they will be
If you are not using an NTP server, you can make changes here and they will be
applied when you click Save.
Enable NTP client
update
Put a check in this box to enable the use of an external NTP server.
Time Zone Select
Choose the Time Zone of your location. This will set the time difference between
your time zone and Greenwich Mean Time (GMT).
NTP Server
Select Auto or Enter the IP address manually. Check with your ISP/network
administrator if you are unsure of this information.
Daylight Saving Time Put a check in this box to enable the use of Daylight Saving Time.
Save
Click Save to save your changes back to the P-330W.
Reset
Click Reset to begin configuring this screen afresh.
Refresh
Click Refresh to display the current time.