ZyXEL p-2302hw-p1 用户手册

P-2302HW/HWL-P1 Series User’s Guide

124

Chapter 7 LAN

Use this screen to make the ZyXEL Device assign a specific IP address to a specific computer 
on the LAN. To access this screen, click Network > LAN > Static DHCP.

Figure 60   Network > LAN > Static DHCP

Each field is described in the following table.

Note: This screen is empty if the DHCP server is not enabled. You can enable it in 

Network > LAN > DHCP Setup.

Use this screen to look at the IP addresses the ZyXEL Device has assigned to DHCP clients on 
the LAN. To access this screen, click Network > LAN > Client List.

Table 50   Network > LAN > Static DHCP

#

This field is a sequential value. It is not associated with a specific entry.

MAC Address

Enter the MAC address of the computer to which you want the ZyXEL Device to 
assign the same IP address.

IP Address

Enter the IP address you want the ZyXEL Device to assign to the computer.

Apply

Click this to save your changes and to apply them to the ZyXEL Device.

Cancel

Click this to set every field in this screen to its last-saved value.