ZyXEL nbg-334w 用户指南

Chapter 2 Introducing the Web Configurator

NBG334W User’s Guide

Use the sub-menus on the navigation panel to configure NBG334W features. 
The following table describes the sub-menus.

Interface

This displays the NBG334W port types. The port types are: WAN, LAN and WLAN.

Status

For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up 

or connected).
For the WLAN, it displays Up when the WLAN is enabled or Down when the WLAN 

is disabled.

Rate

For the LAN ports, this displays the port speed and duplex setting or N/A when the 

line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using 

Ethernet encapsulation and Idle (line (ppp) idle), Dial (starting to trigger a call) and 

Drop (dropping a call) if you're using PPPoE or PPTP encapsulation. This field 

displays N/A when the line is disconnected.
For the WLAN, it displays the maximum transmission rate when the WLAN is 

enabled and N/A when the WLAN is disabled.

Summary

Any IP Table

Use this screen to view details of IP addresses assigned to devices not in the same 

subnet as the NBG334W.

BW MGMT Monitor

Use this screen to view the NBG334W’s bandwidth usage and allotments.

DHCP Table

Use this screen to view current DHCP client information.

Packet Statistics

Use this screen to view port status and packet specific statistics.

WLAN Station Status

Use this screen to view the wireless stations that are currently associated to the 

NBG334W.

Table 4   Web Configurator Status Screen  (continued) 

Table 5   Screens Summary

Status

This screen shows the NBG334W’s general device, system and 

interface status information. Use this screen to access the wizard, 

and summary statistics tables.

Network

Wireless 

LAN

General

Use this screen to configure wireless LAN.

MAC Filter

Use the MAC filter screen to configure the NBG334W to block 

access to devices or block the devices from accessing the 

NBG334W.

Advanced

This screen allows you to configure advanced wireless settings.

QoS

Use this screen to configure Wi-Fi Multimedia Quality of Service 

(WMM QoS). WMM QoS allows you to prioritize wireless traffic 

according to the delivery requirements of individual services.

WAN

Internet 

Connection

This screen allows you to configure ISP parameters, WAN IP 

address assignment, DNS servers and the WAN MAC address. 

Advanced

Use this screen to configure other advanced properties.

LAN

IP

Use this screen to configure LAN IP address and subnet mask.

IP Alias

Use this screen to partition your LAN interface into subnets.

Advanced

Use this screen to enable other advanced properties.