ZyXEL NBG-417N 用户手册

NBG-417N User’s Guide

The following tables summarize the NBG-417N’s hardware and firmware features.

Table 64   Hardware Features

Dimensions (W x D x 
H) 

140 mm x 110 mm x 30 mm

Weight

190 g

Power Specification

Input: 120~240 AC, 50~60 Hz

Output: 12 V DC 1A

Ethernet ports

Auto-negotiating: 10 Mbps, 100 Mbps in either half-duplex or full-
duplex mode.

Auto-crossover: Use either crossover or straight-through Ethernet 
cables.

4-5 Port Switch

A combination of switch and router makes your NBG-417N a cost-
effective and viable network solution. You can add up to four 
computers to the NBG-417N without the cost of a hub when 
connecting to the Internet through the WAN port. You can add up 
to five computers to the NBG-417N when you connect to the 
Internet in AP mode. Add more than four computers to your LAN 
by using a hub.

LEDs

PWR, LAN1-4, WAN, WLAN/WPS

Reset Button

The reset button is built into the rear panel. Use this button to 
restore the NBG-417N to its factory default settings. Press for 1 
second to restart the device. Press for 5 seconds to restore to 
factory default settings.

WPS button

Press the WPS on two WPS enabled devices within 120 seconds 
for a security-enabled wireless connection.

Antenna

The NBG-417N is equipped with a 2dBi (2.4GHz) detachable 
antenna to provide clear radio transmission and reception on the 
wireless network. 

Operation 
Environment

Temperature: 0º C ~ 40º C / 32ºF ~ 104ºF

Humidity: 20% ~ 90% 

Storage Environment Temperature: -30º C ~ 70º C / -22ºF ~ 158ºF

Humidity: 20% ~ 95%