ZyXEL NBG-510S 快速安装指南
ENGLISH
3
1 Initial Hardware Connections
1 Use the yellow (Ethernet) cable to connect the WAN port to your Internet connection
(this could be through a broadband modem or gateway).
2 Use another Ethernet cable to connect a computer to a LAN port.
3 Use the included power adaptor to connect the POWER socket to an appropriate power
3 Use the included power adaptor to connect the POWER socket to an appropriate power
source.
1
Use ONLY the included power adaptor.
4 Check the front panel
lights.
PWR turns on first
followed by WAN and
LAN.
LAN.
V
If no lights turn on when the power is connected, check the port
connections and make sure the power source is turned on.
connections and make sure the power source is turned on.
2 Access the Web Configurator
1 On the computer connected to a LAN port, open Internet Explorer (or see page
15
for
other supported web browser).
2
1
3
Internet