ZyXEL nbg-5715 用户指南

Chapter 22 Maintenance

NBG5715 User’s Guide

The following table describes the labels in this screen.

It is strongly recommended that you change your NBG5715's password. 

If you forget your NBG5715's password (or IP address), you will need to reset the device. See 

 for details.

Click Maintenance > Password. The screen appears as shown.

Maintenance > Password 

The following table describes the labels in this screen.

Maintenance > General

System Name

System Name is a unique name to identify the NBG5715 in an Ethernet 
network.

Domain Name

Enter the domain name you want to give to the NBG5715.

Administrator 
Inactivity Timer

Type how many minutes a management session can be left idle before the 
session times out. After it times out you have to log in with your password 
again. Very long idle timeouts may have security risks. A value of "0" means a 
management session never times out, no matter how long it has been left idle 
(not recommended).

Apply

Click Apply to save your changes back to the NBG5715.

Cancel

Click Cancel to begin configuring this screen afresh.

Maintenance > Password

Password Setup

Change your NBG5715’s password (recommended) using the fields as shown.

Old Password

Type the default password or the existing password you use to access the 
system in this field.

New Password

Type your new system password (up to 30 characters). Note that as you type 
a password, the screen displays an asterisk (*) for each character you type.

Retype to Confirm

Type the new password again in this field.

Apply

Click Apply to save your changes back to the NBG5715.

Cancel

Click Cancel to begin configuring this screen afresh.