ZyXEL nbg-5715 用户指南

Chapter 22 Maintenance

NBG5715 User’s Guide

Restore configuration allows you to upload a new or previously saved configuration file from your 
computer to your NBG5715.

Click Maintenance > Backup/Restore. Information related to factory defaults, backup 
configuration, and restoring configuration appears as shown next.

Maintenance > Backup/Restore 

The following table describes the labels in this screen.

Note: If you uploaded the default configuration file you may need to change the IP 

address of your computer to be in the same subnet as that of the default NBG5715 

IP address (192.168.1.2). See 

 for details on how to set up 

your computer’s IP address.

Maintenance > Backup/Restore

Backup

Click Backup to save the NBG5715’s current configuration to your computer.

File Path 

Type in the location of the file you want to upload in this field or click Browse... to 
find it.

Browse... 

Click Browse... to find the file you want to upload. Remember that you must 
decompress compressed (.ZIP) files before you can upload them. 

Upload 

Click Upload to begin the upload process.

Note: Do not turn off the NBG5715 while configuration file upload is in progress.

After you see a “configuration upload successful” screen, you must then wait one 
minute before logging into the NBG5715 again. The NBG5715 automatically restarts 
in this time causing a temporary network disconnect.

If you see an error screen, click Back to return to the Backup/Restore screen.

Reset

Pressing the Reset button in this section clears all user-entered 
configuration information and returns the NBG5715 to its factory defaults.

You can also press the RESET button on the rear panel to reset the factory defaults 
of your NBG5715. Refer to the chapter about introducing the Web Configurator for 
more information on the RESET button.