ZyXEL p-320w 用户指南

P-320W User’s Guide

116 

Chapter 10 Static Route Screens

Figure 65   IP Static Route

The following table describes the labels in this screen.

Table 49   IP Static Route

#

Number of an individual static route.

Active

This icon is turned on when this static route is active.
Click the edit icon under Modify and select the Active checkbox in the Static 

Route Setup screen to enable the static route. Clear the checkbox to disable this 

static route without having to delete the entry.

Destination

This parameter specifies the IP network address of the final destination. Routing is 

always based on network number. 

Gateway

This is the IP address of the gateway. The gateway is an immediate neighbor of 

your Prestige that will forward the packet to the destination. On the LAN, the 

gateway must be a router on the same segment as your Prestige; over the WAN, 

the gateway must be the IP address of one of the remote nodes.

Modify

Click the edit icon to open the static route setup screen. Modify a static route or 

create a new static route in the Static Route Setup screen.
Click the delete icon to remove a static route.

To edit a static route, click the edit icon under Modify. The following screen displays. Fill in 
the required information for each static route.