Yukon 1x24 用户指南
Other operations, those requiring a hands-free NVB.
BATTERY INSTALLATION
Remove battery cover (1). Install battery CR123A, with the correct polarity. Replace the cover (1).
BATTERY INSTALLATION
Remove battery cover (1). Install battery CR123A, with the correct polarity. Replace the cover (1).
USE AND TESTING
• Adjust the size of the Head Mount to fit your head using the straps.
• Affix the binoculars to the adapter (2) - to do this match the flange of the adapter with the
• Affix the binoculars to the adapter (2) - to do this match the flange of the adapter with the
hole next to the “ON” button and affix the Tracker binoculars to the adapter (2) using the
screw (3).
screw (3).
• Put the Head Mount with the binoculars attached on the head.
• To adjust the position of the unit relative to the eyes, loosen the knobs (4), (5) and move the
unit longitudinally, upwards and downwards adjusting its inclination angle.
• As you find the most comfortable position tighten the knobs (4), (5) to fix the setting.
• Enter a dark area. Open the lenses of the binoculars, pushing the caps (7) to the body,
• Enter a dark area. Open the lenses of the binoculars, pushing the caps (7) to the body,
switch on the binoculars, pushing button “ON” (8). A green indicator will give a signal that
unit is working.
unit is working.
• Checking the efficiency during the daytime is able only with closed caps. Warning: opening
of the caps in this case is forbidden.
• Turn on the IR, pushing button “IR” (9) if necessary. A red indicator will give a signal that
the unit is working.
• Direct the unit at the object, at the distance of 30 to 40 meters. Turn the central focusing
ring (10) and wire mechanic eyepieces (11), so you will be able to improve the quality of
image in both optic channels.
image in both optic channels.
• Watch the object, using only the central focusing ring (10).
• To watch objects without the binoculars, flip the unit into an upright position by pressing
• To watch objects without the binoculars, flip the unit into an upright position by pressing
and holding the button (6).
• When you are finished using the unit, remove the binoculars from the head mount by simply
unfastening the screw counterclockwise (3). Turn off the unit with the button “ON” (8), and
replace the lens caps (7).
replace the lens caps (7).
• Put the unit into the bag.
• Binoculars from this Kit can be used without a Head Mount. In this case put the neck belt
on it.