Sharp MX-M1100 操作指南

This section explains the names and functions of the parts of the following peripheral devices:

 (page 59)

 (page 60)

 (page 60)

 (page 61)

 (page 62)

The finisher is equipped with the offset function, which offsets each set of output from the previous set, and the staple 
sort function, which staples each set of output. 
A punch module can also be installed to punch holes in output.

Stapled and offset output is delivered to these trays.
The trays are slidable. For large-size output (larger than 
8-1/2" x 11"R or A4R), extend the tray.

Open this cover to remove a paper misfeed, replace the 
staple cartridge or remove a staple jam.

This button temporarily stops printing to the offset tray. 
This button can be used to pause printing and remove 
output from the offset tray before the maximum tray 
capacity is reached. To resume printing, press the button 
once again.

• Do not place heavy objects on or press down on the peripheral devices

• For peripheral devices with an offset tray, note that the tray will move up and down when the power is turned on and during 

output.

• The finisher cannot be installed when a finisher (for the MX-M850), or saddle stitch finisher is installed.

• Paper that can be punched is 5-1/2" x 8-1/2" to 11" x 17" (16 lbs. to 65 lbs. cover) (A5 to A3 (52 g/m

2

 to 176 g/m

2

))